Abstract:
RESUMEN: El asentamiento de tubería revestimiento es una operación de vital importancia para la explotación y aprovechamiento de un yacimiento ya que permite ir perforando el pozo por etapas, proteger las zonas perforadas, aislar las zonas problemáticas, controlar las presiones durante la perforación, etc. El presente trabajo tiene como finalidad dar a conocer la metodología teórica y práctica para el asentamiento, diseño y cementación de la tubería de revestimiento en cada etapa de perforación de un pozo. Para ello se aborda en los primeros capítulos la teoría para realizar la ventana operativa, posteriormente se utiliza el método gráfico para realizar el asentamiento de cada tubería, su diseño por esfuerzos uniaxiales y la cementación. En el capítulo uno, se aborda el tema de las cuencas de México, ubicación y reservas. En el capítulo dos, se mencionan los conceptos fundamentales para la elaboración de la ventana operativa y los métodos para hacerla. En el capítulo tres, se comenta lo referente a la tubería de revestimiento y se analiza los esfuerzos a los que está sometida cuando se va a asentar. En el capítulo cuatro, aborda el tema de cementación, así como su clasificación. Por último, en el capítulo cinco, se realiza un caso práctico, con los conceptos abordados en los capítulos anteriores.
ABSTRACT: The settlement of the caising is an operation of vital importance for the exploitation and the use of a place that allows it to drill the well in stages, protect the perforated areas, isolate the problem areas, control the pressures during drilling, etc. The present work has as objective to present the theoretical and practical methodology for the settlement, the design and the cementation of the pipe of the installation of each stage in the drilling of a well. For this purpose, the theory to carry out the operative window is addressed in the first chapters, then the graphic method is used to make the settlement of each of the parts, its design for the uniaxial stresses and the cementation. In chapter one we address the issue of the basins of Mexico, their location and reserves. In chapter two, the fundamental concepts for the elaboration of the operative window and the methods to do it are mentioned. In chapter three we talk about the casing and analyze the efforts to which it is at some point when it is going to settle. In chapter four he discusses the subject of cementation, as well as its classification. Finally, in chapter 5 a practical case is made, the concepts addressed in the previous chapters are implemented in practice.
Description:
Tesis (Ingeniería Petrolera), Instituto Politécnico Nacional, ESIA, Unidad Ticomán, 2019, 1 archivo PDF, (112 páginas). tesis.ipn.mx