Abstract:
RESUMEN: El trabajo propuesto se desarrolla en el área correspondiente a la cuenca Norte en Sumatra, Indonesia, en la cual se interpretaron las formaciones Lower Baong, Belumai y Bampo. Se tiene como objetivo determinar la mejor zona de interés y el tipo de roca, integrando geológicamente, la mecánica de rocas, los datos de registros geofísicos de pozo, el Carbono Orgánico Total (TOC) y el cálculo del índice de fragilidad. La integración de todos los datos lleva al establecimiento de tipos de roca para determinar la mejor profundidad a desarrollar. Para este estudio se poseen registros para el correcto procesamiento, de los cuales podemos enunciar rayos gamma, caliper, densidad, porosidad, resistivos, neutrón y tiempo de tránsito. Las principales propiedades petrofísicas convencionales, como la permeabilidad, el contenido de arcilla, la porosidad, la saturación de agua, el TOC y las propiedades elásticas son fundamentales para la interpretación de este trabajo. La interpretación de datos muestra que las Formaciones Lower Baong y Belumai son de potencial interés petrolero a comparación de la Formación Bampo no muestra ninguna zona de interés. Por último se concluye que para obtener la zona de interés y el tipo de roca los módulos elásticos son de gran ayuda.
ABSTRACT: The proposed work is developed in the corresponding area to the North Basin in Sumatra, Indonesia, in which the Lower Baong, Belumai and Bampo formations were interpreted. The objective is to determine the best area of interest and the type of rock, integrating geologically, the rock mechanics, well data logs, the total organic carbon (TOC) and the calculation of brittleness index. The integration of all the data leads to the establishment of rock type to determine the best depth to develop. For this study we have logs for the correct processing, of which we can enunciate gamma ray, caliper, density, porosity, resistive, neutron and transit time. The main conventional petrophysical properties, such as permeability, clay content, porosity, water saturation, TOC and elastic properties are fundamental to the interpretation of this work. The interpretation of data shows that the formations Lower Baong and Belumai are of potential oil interest compared to the formation Bampo does not show any zone of interest. Finally it is concluded that to obtain the area of interest and the type of rock elastic modules are very helpful.
Description:
Tesis (Ingeniería Geofísica), Instituto Politécnico Nacional, ESIA, Unidad Ticomán, 2019, 1 archivo PDF, (62 páginas). tesis.ipn.mx