1.- Unidades Académicas de Nivel Medio Superior: Recent submissions

  • Trujillo Vidal, Saúl Eduardo (2021-06-11)
    ABSTRACT: Start the elaboration of this thesis tube that will investigate a product of manufacture and the country of destination; choosing the product was not easy, since it had to be something innovative and change the ...
  • Avila Villegas, Julieta; García García, Frida Ashly; Sánchez Flores, Carlos Miguel (2019-12-10)
    ABSTRACT: This thesis is based on the export of pig waste collected from one of the biggest pig farms in Mexico, these waste were collected over two months during which these wastes were placed in sacks and stored in a ...
  • Ortega Guerrero, Hannia Anahí (2019-12-10)
    ABSTRACT: The purpose of this summary is to capture the interest of a third party, investor or partner, and to make it read this thesis. Help for All S.A. is a company dedicated to the commercialization of human saliva ...
  • Caballero Sánchez, Shaaron; Guevara Paz, Carolina; Manuel Guzmán, Albero Alejandro (2019-03-12)
    ABSTRACT: The present project is carried out with a systematic methodology through a documentary research and the use of the documentary incorporation, which consisted in the first place to raise a current problem within ...
  • Azpeitia Salazar, Cinthya Karina; Juárez Cruz, Monica Italivi; Reyes Santiago, Janeth Elizabeth (2019-03-07)
    RESUMEN : En el presente proyecto se pretende diseñar y fabricar una maquina que mejore y facilite el proceso manual de afilado de buriles. Con la construcción de este dispositivo se propone que el afilado de herramientas ...
  • Gutiérrez Ramos, Ana Lucia; Martínez Pérez, Francisco Manuel (2019-02-15)
    ABSTRACT: This project consists of an export of 150 electrical distribution transformers to the Republic of Austria for the project that is underway for the modernization of public lighting in the municipalities of high ...
  • Nambo Velázquez, Alejandra; Sánchez Ortega, Fatima Aide; Zavala Reséndiz, Paulina (2019-02-15)
    ABSTRACT: The problem sets a standard for undertaking an act of international commerce, in this case the need for Assuta Medical Center in Israel to import digital thermometers to cover public health programs. The health ...
  • Cepero Coronel, Kimberly Yaren; Salgado Ángeles, Diana Gabriela (2019-02-15)
    ABSTRACT: The purpose of this project has been made to determine the viability in an export operation of Smart TVs to Netherlands in the year 2018, with the aim of satisfying the market goal that product. This thesis ...
  • Galicia Hernández, Jonathan Jesús; Jiménez Rosales, Itza; Pineda Madrigal, Dulce Berenice; Lorenzo Chico, Axel Cid Freed (2019-02-15)
    ABSTRACT: The present investigation shows the process of an Export Company of consumer goods. Produced in Mexico and exported to Michigan, EU. The export product is stainless steel wheels of the brand RINES JADI, a company ...
  • Cerón Jaimes, José Antonio; Herrera Dávila, José Luis (2019-02-15)
    ABSTRACT: This project consists in export solar panels to Belgic, which were fabricated by the company PaneMex. Throughout the thesis it is explained the procedure for create a company from the simple (the choice of product ...
  • Álvarez De León, Brenda; Arias Posadas, Saori; Belmont Villanueva, Alberto; Ruiz Islas, Diego Andrés (2019-02-15)
    ABSTRACT: The company ODMEX SA de CV is focused on the development of a plan to enter the Canadian market for dental kits to Ottawa, Public Hospital named Deparment of Public Works and Goverment Services. Why negotiate ...
  • Cruz De La Cruz, Norma Alejandra; Estrada Arredondo, Valeria; García Salgado, Cecilia; Hernández Reséndiz, Sarah Ikram (2019-02-15)
    ABSTRACT: Polimedic was founded in 2011, in Mexico City, it’s a company dedicated to the development of surgical instruments, which is an element used in surgical procedures, is an expensive, delicate and sophisticated ...
  • Espinosa Dávila, Osvaldo Misael; Hernández Esquivel, Joselyn; Ramírez Salgado, Luis Emmanuel (2019-02-15)
    ABSTRACT: The following thesis is intended to the analysis, planning and research of the information on the export of a product in the market of Germany and find any of the needs of the country, when the presence of a need ...
  • Mendiola Rodríguez, Geraldinne Guadalupe; Ramírez Arguello, Laura Ivonne; Sánchez García, Fátima (2019-02-15)
    ABSTRACT: This project focuses on the export of rear-view mirrors for the company DORET. Throughout the thesis we present how the creation of the company develops from the simplest (the choice of product, market and company), ...
  • Anaya Arredondo, Manuel Alejandro; Cabrera González, Yamileth; Ruiz Cabañas, María Fernanda; Ventura López, Carolina (2019-02-15)
    ABSTRACT: The research of this thesis is based on the development and commercialization of a company and product towards the automobile manufacturing companies, so first of all an approach to the problem is established ...
  • Alvarado Frías, Daniel Esteban; Toledano Márquez, Darynka de la Caridad; Yáñez Gómez, Henry (2019-02-12)
    ABSTRACT: In the following investigation the objective is the study related to the export of finished products, and with the possibility and viability of operation.Within the present investigation, a process of exporting ...
  • Jiménez Álvarez, Dania; Martínez Martínez, Alejandra; Melo García, Froylan Kaleb; Romero Domínguez, Julieta (2019-02-12)
    ABSTRACT: HEALTHY HEART, S.A. DE C.V is a company that produces "Needles and Catheters", they are surgical materials that are designed for a puncture as painless as possible thanks to its triple bevel sharpening. These two ...
  • Jacobo Franco, Fernanda (2019-02-12)
    ABSTRACT: ACEHMEX is an iron and steel manufacturer founded in Municipio since 2005. In Lázaro Cárdenas, Michoacán, which aims to expand the market to Europe, offering a high quality material, has the benefit that not only ...
  • Armengol Méndez, Jesús; Cabrera Vázquez, Magali; Caballero de la Trinidad, Omar; Sánchez Romero, Edgar Isaac (2019-02-12)
    ABSTRACT: This project shows through the company "Camas Ultra" whose main activity focused on developing medical products basically on beds for hospital use and their interest to incorporate them into the international ...

Search DSpace


Browse

My Account