dc.contributor.author |
Espinosa Garcia, Alan Rafael |
|
dc.date.accessioned |
2022-07-12T21:21:25Z |
|
dc.date.available |
2022-07-12T21:21:25Z |
|
dc.date.created |
2022-05-27 |
|
dc.date.issued |
2022-07-11 |
|
dc.identifier.citation |
Espinosa Garcia, Alan Rafael. (2022). Prototipo de inyectora de materiales termoplásticos flexibles para prótesis dentales. (Ingeniería en Mecatrónica). Instituto Politécnico Nacional, Unidad Profesional Interdisciplinaria en Ingeniería y Tecnologías Avanzadas, México. |
es |
dc.identifier.uri |
http://tesis.ipn.mx/handle/123456789/30643 |
|
dc.description |
Tesis (Ingeniería en Mecatrónica). Instituto Politécnico Nacional, UPIITA, 2022, 1 archivo PDF, (180 páginas). tesis.ipn.mx |
es |
dc.description.abstract |
RESUMEN: El moldeo por inyección es una de las técnicas más usadas para la elaboración de productos plásticos mediante el uso de resinas, teniendo una amplia gama de implementaciones en la industria. Entre dichas implementaciones se encuentra la fabricación de prótesis dentales mediante el empleo de termoplásticos y a cuyo proceso de creación hace alusión el presente trabajo. El argumento para la elaboración del proyecto a continuación presentado está encaminado al diseño y construcción de un prototipo de inyectora de materiales termoplásticos flexibles que resuelva las deficiencias y fallas encontradas en las máquinas inyectoras existentes, basándose en las necesidades y requerimientos tanto del usuario como del proceso de inyección implementado. A lo largo del capítulo I se hace una introducción a los sistemas de inyección por moldeo para la fabricación de prótesis dentales, los tipos de máquinas inyectoras existentes y sus deficiencias dando paso al planteamiento de los objetivos a alcanzar tanto en lo particular como en lo general. Sucesivamente en los capítulos II y III se hace el planteamiento, selección, y desarrollo (teórico y conceptual respectivamente), de las diferentes alternativas planteadas y sus implicaciones en la operatividad y funcionalidad del prototipo en general. Para finalizar, en el capítulo IV se hace una recopilación de las observaciones que se presentaron a lo largo del proyecto y las sus correspondientes conclusiones y resultados en la implementación del prototipo.
ABSTRACT: The molding by injection is one of the most used techniques for the production of plastic products through the use of resins, having a wide range of implementations in the industry. Among these implementations is the manufacture of dental prostheses through the use of thermoplastics and whose creation process alludes to the present work. The argument for the elaboration of the project presented below is aimed at the design and construction of a prototype of flexible thermoplastic materials injector to solve the deficiencies and faults found in existing injector machines, based on the needs and requirements of both the user and the process of injection implemented. Throughout chapter I an introduction is made to injection molding systems for the manufacture of dental prostheses, the types of existing injection machines and their deficiencies giving way to the approach of the objectives to be achieved both in particular and in general. Successively in chapters II and III the approach, selection, and development (theoretical and conceptual respectively) of the different alternatives and their implications in the operation and functionality of the prototype in general. Finally, chapter IV contains a compilation of the observations that were presented throughout the project and the corresponding conclusions and results in the implementation of the prototype. |
es |
dc.language.iso |
es |
es |
dc.subject |
Inyectora |
es |
dc.subject |
Termoplastificación |
es |
dc.subject |
Temperatura |
es |
dc.title |
Prototipo de inyectora de materiales termoplásticos flexibles para prótesis dentales |
es |
dc.contributor.advisor |
Peza Tapia, Juan Manuel |
|
dc.contributor.advisor |
Cuervo Pinto, Víctor Darío |
|
dc.contributor.advisor |
Mollinedo Ponce de León, Helvio Ricardo |
|
dc.programa.academico |
Ingeniería Mecatrónica |
es |